|
|
|
|
|
|
Ford 2300 Header Flange. |
|
|
|
|
| |
|
Steel, CNC laser cut, 1/4” thick
for 1 5/8” tubes. Each |
EACH |
|
|
|
|
| |
|
Part # 6100 |
$ 23.52 |
|
|
|
|
|
Ford 2300 Header Flange. |
Check for stock |
|
|
|
|
| No Picture |
|
Stainless steel, CNC laser cut,
3/8” thick for 1 5/8” tubes. |
EACH |
|
|
|
|
| |
|
Part # 6100SS |
$ 70.08 |
|
|
|
|
|
Ford 260, 289,302,351w Header Flanges |
|
|
|
|
|
|
Steel, CNC laser cut, 5/16”
thick for 1 5/8" - 1 3/4” tubes. |
PAIR |
|
|
|
|
| |
|
Part # 6102 |
$ 46.01 |
|
|
|
|
|
Ford 260, 289,302,351 Header Gasket |
|
|
|
|
|
|
Made
from high conformability, heat resistant material. |
PAIR |
|
|
|
|
| |
|
Part # 6103 |
$ 11.55 |
|
|
|
|
|
Ford 2000 Header Flange |
|
|
|
|
|
|
Steel, CNC laser cut, 1/4"
thick for 1 1/2" - 1 5/8" tubes |
EACH |
|
|
|
|
| |
|
Part # 6104 |
$ 31.26 |
|
|
|
|
|
Ford 2300 Header Gasket |
|
|
|
|
|
|
Made from high conformability,
heat resistant material. |
EACH |
|
|
|
|
| |
|
Part # 6105 |
$ 7.06 |
|
|
|
|
|
Ford 2000 Header Gasket |
|
|
|
|
|
|
Made from high conformability,
heat resistant material. |
EACH |
|
|
|
| |
|
Part # 6107 |
$ 7.00 |
|
|
|
|
Ford 2300 Header Bolts. |
|
|
|
|
|
These
are the correct 10mm metric bolts. With 3/8 wrench heads. |
SET
of 8 |
|
|
|
| |
|
Part # 6108 |
$ 7.06 |
|
|
|
|
Ford 2000 Header Bolts. |
|
|
|
|
|
These
are the correct 8mm metric bolts. With 3/8 wrench heads. |
SET
of 8 |
|
|
|
| |
|
Part # 6109 |
$ 7.06 |
|
|
|
|
Header 12 Bolt sets. V8 & V6 |
|
|
|
|
|
For
Chevrolet, Olds, Pontiac, Buick, B & RB Chrysler. 3/8" x 16 x
1" bolts. These have a 5/16 wrench head. Black oxide coated. |
Set of 12 |
|
|
|
| |
|
Part # 6110 |
$ 8.19 |
|
|
|
|
Header 16 Bolt sets. V8 & V6 |
|
|
|
|
|
3/8"
x 16 x 1" bolts. Ford small block, FE, Cleveland and midland engines.
These have a 5/16 wrench head. Black oxide coated |
Set of 16 |
|
|
|
| |
|
Part # 6112 |
$ 10.92 |
|
|
|
|
Toyota 20r/22r Header Flange. |
|
|
|
|
|
|
Steel,
CNC laser cut, 1/4” thick for 1 5/8” tubes. Machinable for 1 3/4" |
EACH |
|
|
|
|
| |
|
Part # 6120 |
$ 24.88 |
|
|
|
|
|
Toyota 20r/22r Header Gasket |
|
|
|
|
|
|
Made from
high conformability, heat resistant material. |
EACH |
|
|
|
|
| |
|
Part # 6124 |
$ 7.85 |
|
|
|
|
|
Chevrolet S/B Header Flange |
|
|
|
|
|
|
Steel, CNC laser cut, 3/8” thick
for 1 5/8" - 1 3/4” tubes. Sold in pairs. |
PAIR |
|
|
|
|
| |
|
Part # 6130 |
$ 44.80 |
|
|
|
|
|
Chevrolet 283 - 400
Header Gasket |
|
|
|
|
|
|
Made
from high conformability, heat resistant material. Sold in pairs. |
PAIR |
|
|
|
|
| |
|
Part # 6132 |
$ 11.01 |
|
|
|
|
|
Chevrolet 4.3L V6 Header
Flanges |
|
|
|
|
|
|
Steel, CNC laser cut, 5/16”
thick for 1 5/8" - 1 3/4” tubes. |
PAIR |
|
|
|
|
| |
|
Part # 6134 |
$ 39.78 |
|
|
|
|
|
Chevrolet 4.3L V6 Header
Gasket |
|
|
|
|
|
|
Made from
high conformability, heat resistant material. |
PAIR |
|
|
|
|
| |
|
Part # 6136 |
$ 9.70 |
|
|
|
|
|
Chevrolet LS1 Header
Flanges |
|
|
|
|
|
|
Steel,
CNC laser cut, 3/8” thick. 1 3/4" or 1 5/8" tubing |
PAIR |
|
|
|
|
| |
|
Part # 6138 |
$ 44.80 |
|
|
|
|
|
Chevrolet LS1 Header
Gasket |
|
|
|
|
|
|
Made from high conformability,
heat resistant material. |
PAIR |
|
|
|
|
| |
|
Part # 6140 |
$ 11.17 |
|
|
|
|
|
Ford / Mazda 1.8L Header Flange |
|
|
|
|
|
|
Steel, CNC laser cut, 5/16”
thick for 1 3/8” tubes. Each |
EACH |
|
|
|
|
| |
|
Part # 6142 |
$ 23.32 |
|
|
|
|
|
Ford / Mazda 1.8L Header Gasket |
|
|
|
|
|
|
Made from high conformability,
heat resistant material. |
EACH |
|
|
|
|
| |
|
Part # 6144 |
$ 7.53 |
|
|
|
|
|
Ford / Mazda 2.0L Header
Flange |
|
|
|
|
|
|
Steel, CNC laser cut, 5/16”
thick for 1 3/8” tubes. Each |
EACH |
|
|
|
|
| |
|
Part # 6146 |
$ 20.53 |
|
|
|
|
|
Ford / Mazda 2.0L Header Gasket |
|
|
|
|
|
|
Made from high conformability,
heat resistant material. |
EACH |
|
|
|
|
| |
|
Part # 6148 |
$ 7.53 |
|
|
|
|
|
Collectors |
|
|
|
|
|
|
16 gauge. 3 - 1 1/2" into 2
1/2", Standard 5 1/2” long |
EACH |
|
|
|
|
|
Part # 6204 |
$ 13.99 |
|
|
|
|
|
16 gauge. 3 - 1 5/8" into 2 1/2", Standard 5 1/2”
long |
EACH |
|
|
|
|
Part # 6206 |
$ 13.99 |
|
|
|
|
|
16 gauge. 3 - 1 5/8" into 3”
Standard, 6” long |
EACH |
|
|
|
| |
|
Part # 6208 |
$ 13.99 |
|
|
|
|
16 gauge. 4 - 1 1/2" into 2 1/2” Standard, 5” long |
EACH |
|
|
|
|
|
Part # 6210 |
$ 13.99 |
|
|
|
|
|
16 gauge. 4 - 1
1/2" into 3” Standard, 5” long |
EACH |
|
|
|
|
Part # 6212 |
$ 13.99 |
|
|
|
|
|
16 gauge. 4 - 1 5/8" into 3”
Standard, 6” long |
EACH |
|
|
|
|
Part # 6214 |
$ 13.99 |
|
|
|
|
|
16 gauge. 4 - 1
3/4" into 3” Standard, 6” long |
EACH |
|
|
|
| |
|
Part # 6216 |
$ 15.25 |
|
|
|
|
|
16 gauge, 4 - 1 ¾” into 3” Transition. 7 1/2” long. This is the most efficient collector available. |
EACH |
|
|
|
| |
|
Part # 6218 |
$
28.35 |
|
|
|
| |
2 1/2" Collector flange 3
bolt |
|
|
|
|
|
|
5/16"
thick 3 bolt 2 1/2" collector ring.
|
EACH |
|
|
|
|
|
Part # 6220 |
$
3.92 |
|
|
|
|
|
3/8"
thick 3 bolt 2 1/2" collector ring.
|
EACH |
|
|
|
|
|
Part # 6222 |
$ 7.96 |
|
|
|
|
|
|
1/4"
thick 3 bolt 2 1/2" collector ring. |
EACH |
|
|
|
|
|
|
Part # 6224 |
$
1.98 |
|
|
|
|
2 1/2" Collector
flange 3 bolt gasket |
|
|
|
|
|
|
Heavy duty 3\32"
thick |
PAIR |
|
|
|
| |
|
Part # 6226 |
$
2.10 |
|
|
|
|
3" Collector flanges
3 Bolt |
|
|
|
|
|
|
3/8"
thick 3 bolt 3" collector flange.
|
EACH |
|
|
|
|
Part # 6230 |
$
9.90 |
|
|
|
|
|
1/4"
thick 3 bolt 3" collector flange. |
EACH |
|
|
|
|
|
Part # 6232 |
$
2.25 |
|
|
|
|
3" Collector flange 3
bolt gasket |
|
|
|
|
|
Heavy duty 3\32"
thick |
PAIR |
|
|
|
| |
|
Part # 6234 |
$
4.65 |
|
|
|
|
Collector flange bolt kit |
|
|
|
|
|
|
3 zinc plated bolts and nuts for header collector flange. |
SET |
|
|
|
| |
|
Part # 6235 |
$
2.27 |
|
|
|
|
Collector flange bolt kit |
|
|
|
|
|
|
6 zinc plated bolts and nuts for header collector flange. |
SET |
|
|
|
| |
|
Part # 6236 |
$
4.54 |
|
|
|
|
Collector retaining tab
set |
|
|
|
|
|
|
Two tabs, bolt and nut for retaining slip on reducers. |
SET |
|
|
|
| |
|
Part # 6238 |
$
4.98 |
|
|
|
|
3" to 2 1/2"
collector reducer kit single |
|
|
|
|
|
Hook
up your exhaust system with this kit.
1- Reducers, 1- 1/4" thick flange, 1- gasket and zinc plated
bolts. |
KIT |
|
|
|
|
|
Part # 6240 |
$
10.36 |
|
|
|
|
3" to 2 1/2"
collector reducer kit pair |
|
|
|
|
|
Hook
up your exhaust system with this kit.
2- Reducers, 2 - 1/4" thick flanges, 2 - gaskets and zinc plated
bolts. |
KIT |
|
|
|
| Pair |
|
Part # 6242 |
$
20.48 |
|
|
|
| Pictures are generic |
3" to 2 1/2"
collector reducer kit pair |
|
|
|
|
|
Hook
up your exhaust system with this kit.
2- Reducers, 2 - 3/8" thick flanges, 2 - gaskets and zinc plated
bolts. |
KIT |
|
|
|
| |
|
Part # 6244 |
$
38.35 |
|
|
|
|
2 1/2" to 2"
collector reducer kit single |
|
|
|
|
|
Hook up your exhaust system with
this kit. 1- Reducer, 1- 1/4"
thick flange, 1- gasket and zinc plated bolts. |
KIT |
|
|
|
|
|
Part # 6246 |
$ 9.89 |
|
|
|
|
2 1/2" to 2"
collector reducer kit pair |
|
|
|
| Single |
|
Hook
up your exhaust system with this kit.
2- Reducers, 2 - 1/4" thick flanges, 2 - gaskets and zinc plated
bolts. |
KIT |
|
|
|
| Pictures are generic |
|
Part # 6248 |
$ 19.55 |
|
|
|
|
2 1/2" 3 Bolt
Collector ring kit 1/4" pair |
|
|
|
|
|
|
Contains 2 flanges, gaskets, 6
Bolts & nuts |
KIT |
|
|
|
|
|
Part # 6250 |
$ 10.85 |
|
|
|
|
2 1/2" 3 Bolt
Collector ring kit 1/4" single |
|
|
|
|
|
Contains one flange, gasket, 3
Bolts & nuts |
KIT |
|
|
|
|
|
Part # 6252 |
$ 5.49 |
|
|
|
|
2 1/2" 3 Bolt
Collector ring kit 5/16" pair |
|
|
|
|
|
Contains 2 flanges, gaskets, 6 Bolts & nuts |
KIT |
|
|
|
| Single |
|
Part # 6254 |
$ 14.72 |
|
|
|
| Pictures are generic |
2 1/2" 3 Bolt
Collector ring kit 5/16" single |
|
|
|
|
|
Contains one flange, gasket, 3
Bolts & nuts |
KIT |
|
|
|
|
|
Part # 6256 |
$ 7.42 |
|
|
|
|
3" 3 Bolt Collector
ring kit 1/4" single |
|
|
|
|
|
|
Contains 2 flanges, gaskets, 6 Bolts & nuts |
KIT |
|
|
|
|
|
Part # 6258 |
$ 6.65 |
|
|
|
|
3" 3 Bolt Collector
ring kit 1/4" pair |
|
|
|
|
|
|
Contains one flange, gasket, 3
Bolts & nuts |
KIT |
|
|
|
| Pair |
|
Part # 6260 |
$ 11.78 |
|
|
|
| Pictures are generic |
3" 3 Bolt Collector
ring kit 3/8" single |
|
|
|
|
|
|
Contains 2 flanges, gaskets, 6 Bolts & nuts |
KIT |
|
|
|
|
|
Part # 6262 |
$ 14.70 |
|
|
|
|
3" 3 Bolt Collector
ring kit 3/8" pair |
|
|
|
|
|
Contains one flange, gasket, 3
Bolts & nuts |
KIT |
|
|
|
| |
|
Part # 6264 |
$ 29.28 |
|
|
|
|
2 1/2" Collector
flange slotted 2 bolt |
|
|
|
|
|
|
5/16"
thick 2 bolt slotted 2 1/2" collector ring. |
EACH |
|
|
|
|
Part # 6266 |
$ 4.21 |
|
|
|
|
|
3/8"
thick 2 bolt slotted 2 1/2" collector ring. |
EACH |
|
|
|
|
|
Part # 6268 |
$ 11.64 |
|
|
|
|
|
2 1/2" Collector flange 2
bolt |
|
|
|
|
|
|
5/16"
thick 2 bolt 2 1/2" collector ring.
|
EACH |
|
|
|
|
|
Part # 6270 |
$ -
|
|
|
|
|
|
3/8"
thick 2 bolt 2 1/2" collector ring.
|
EACH |
|
|
|
|
|
|
Part # 6272 |
$ 12.67 |
|
|
|
|
|
2 1/2" Collector
flange 2 bolt gasket |
|
|
|
|
|
|
Heavy duty 3\32"
thick |
PAIR |
|
|
|
| |
|
Part # 6274 |
$ -
|
|
|
|
|
Collector flange 2 bolt,
bolt kit. |
|
|
|
|
|
|
2 zinc plated 1/2" bolts
and flanged nuts for header collector flange. |
SINGLE
|
|
|
|
| |
|
Part # 6276 |
$ 4.87 |
|
|
|
|
Collector flange 2 bolt, bolt kit. |
|
|
|
|
|
|
4 zinc plated 1/2" bolts
and flanged nuts for header 2 bolt collector flange. |
PAIR |
|
|
|
| |
|
Part # 6278 |
$ 9.74 |
|
|
|
|
Header AIR Bung 12mm |
|
|
|
|
|
Air pump bungs weld onto the
header tubes for smog legal installations. Made for 8mm tubes with 12mm
internal threads Sold in sets of 4 |
SET
of 4 |
|
|
|
| |
|
Part # 6280 |
$ 30.95 |
|
|
|
|
|
Oxygen sensor bung |
|
|
|
|
|
Weld in Oxygen sensor bung with
18mm threads. Will fit most Oxygen sensors. |
Each |
|
|
|
| Bottom |
|
Part # 6282 |
$ 5.67 |
|
|
|
|
Oxygen sensor plug |
|
|
|
|
|
Oxygen sensor plug with 18mm
threads. Will fit most Oxygen sensors bungs. |
Each |
|
|
|
| Bottom |
|
Part # 6284 |
$ 5.60 |
|
|
|
|
U Bends Mandrel bent with 6" legs, 16 gauge tubing. |
|
|
|
|
|
|
3”od on 6” radius |
Each |
|
|
|
|
|
Part # 6300 |
$ 36.67 |
|
|
|
|
|
1 ½” on 2 ½” radius |
Each |
|
|
|
|
|
Part # 6320 |
$ 9.39 |
|
|
|
|
|
1 ½” on 3” radius |
Each |
|
|
|
|
|
Part # 6322 |
$ 10.48 |
|
|
|
|
|
1 5/8” on 2 1/2” radius |
Each |
|
|
|
| Pictures are generic |
|
Part # 6324 |
$ 9.66 |
|
|
|
|
|
1 5/8” on 3” radius |
Each |
|
|
|
|
|
Part # 6326 |
$ 9.93 |
|
|
|
|
|
1 3/4" on 2 1/2" radius |
Each |
|
|
|
|
|
Part # 6328 |
$ 9.66 |
|
|
|
|
|
1 3/4" on 3” radius |
Each |
|
|
|
|
|
Part # 6330 |
$ 10.12 |
|
|
|
|
|
2" on 3” radius |
Each |
|
|
|
|
|
Part # 6330 |
$ 13.97 |
|
|
|
|
J Bends Mandrel bent with 1- 6" and 1- 15" leg, 16 gauge. |
|
|
|
|
1 5/8" on 2.5" radius |
Each |
|
|
|
|
|
Part # 6350 |
$ 17.62 |
|
|
|
|
|
1 3/4" on 2.5" radius |
Each |
|
|
|
|
6352 |
$ 17.66 |
|
| Pictures are generic |
|
Part # 6352 |
$ 15.54 |
|
| |
U & J bends also
available in stainless steel |
Inquire |
|
| © Automotive Component
Engineering
2005/12 |
|
|
|
|
|
2/3/2012 |
|
|
|
| Return to Catalog
Index |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
