ENGINE SWAP COMPONENTS
Engine conversion components, for the street, off road or race track, for the experienced and non experienced installer. With over 50 years of experience, we provide you a conversion that is reliable and with the look of a factory installation. All the critical engineering is done, saving you time & money. Components are designed for correct engine placement, driveline angles, balance, strength, longevity and weight bias, for many years of enjoyable use. Most parts are bolt in for ease of installation and require absolute minimum of cutting or welding. Complete with full, easy to understand instructions.
We use 1800*+ Serakote silver ceramic coating on our coated headers.
Datsun Pick Up   283-400CI Chevy / 4.3L Chevy V6 / LSx All Prices subject to change.
72 1/2 - 79 PL620 SB Chevy 4/2/2018
V8 SB Chevy. Engine adapters. Bolt in, easy installation, no welding. Use #122267 cushions. Includes #10125 bolt kit. 2 WD & After market 4 WD. Full Instructions included. Semi Black powder coat finish. May fit latter trucks. Shipping $ 13.65 Lower 48 States
      Part # 10100 $ 124.50 4. Lbs
72 1/2 - 79 PL620 SBC 283 -400 Chevy TH350 / 4 SPD
V8 SB Chevy. Engine adapters Bolt in, easy installation, no welding. Includes #122267 D.O.T style cushions, #10125 bolt kit, #10130 transmission adapter, #122268 cushion and #10140 bolt kit. 2 WD & After market 4 WD. Full Instructions included. Gold zinc plated. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10100K1 $ 209.83  
72 1/2 - 79 PL620 SBC 283 -400 Chevy 700R4 / 5 SPD
V8 SB Chevy. Engine adapters Bolt in, easy installation, no welding. Includes #122267 D.O.T style cushions, #10125 bolt kit, #10132 transmission adapter, #122268 cushion and #10145 bolt kit. 2 WD & After market 4 WD. Full Instructions included. Gold zinc plated. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10100K2 $ 211.19  
72 1/2 - 79 PL620 4.3L Chevy
V6 4.3L Chevy, Engine adapters pair R/L Bolt in, easy installation, no welding. Use 122267 cushions & 10120 bolt kit. 2 WD & After market 4 WD. Full Instructions included. May fit latter model trucks. Gold zinc plated Shipping $ 7.90 Lower 48 States
      Part # 10105 $ 85.88 4 LBS
72 1/2 - 79 PL620 4.3L Chevy w 700R4 / 4 SPD
4.3L V6 Chevy. Engine adapters Bolt in, easy installation, no welding. Includes #122267 D.O.T style cushions, #10125 bolt kit, #10132 transmission adapter, #122268 cushion and #10145 bolt kit. 2 WD & After market 4 WD. Full Instructions included. Gold zinc plated.. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States 10105K1 $ 183.94  
72 1/2 - 79 PL620 LSx 4.8, 5.3, 5.7, 6.0, etc. Chevy TH350 4 speed.
10715 LSx Chevrolet Engine adapters with #10105 frame adapters. Bolt in, easy installation, no welding. includes #122267 D.O.T style cushions & #10120 bolt kit. 2 WD & After market 4 WD. Full Instructions included. #10130 transmission adapter, #122268 cushion and #10140 bolt kit. 2 WD & After market 4 WD. Full Instructions included. Gold zinc plated. May fit latter trucks. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10115K1 $ 267.14  
72 1/2 - 79 PL620 LSx 4.8, 5.3, 5.7, 6.0, etc. 700R4, 5 speed.
10715 LSx Chevrolet Engine adapters with #10105 frame adapters. Bolt in, easy installation, no welding. includes #122267 D.O.T style cushions & #10120 bolt kit. 2 WD & After market 4 WD. Full Instructions included. #10132 transmission adapter, #122268 cushion and #10145 bolt kit. 2 WD & After market 4 WD. Full Instructions included. Gold zinc plated. May fit latter trucks. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10115K2 $ 268.14  
71 - 72 PL520 SB Chevy
V8 SB Chevy. Engine adapters pair R/L Bolt in, easy installation, no welding. Use #122142 cushions. 2 WD & After market 4 WD. Full Instructions included. Requires L series engine frame brackets, to be installed. Some 71"s have the L series mounts installed. You can add Factory frame brackets welding required, pn L 11240-B2001, pn R 11241-B2001 Shipping $ 13.65 Lower 48 States
    Limited Quantity Part # 10110 $ 68.92  
72 1/2 - 79 V6 Engine adapters bolt kit.
Contains correct bolts, washers & nuts to install cushions to engine, cushion to adapter. Zinc plated.
      Part # 10120 $ 12.68  
72 1/2 - 79 V8 Engine adapters bolt kit.
Contains correct bolts, washers & nuts to install cushions to engine, cushion to adapter. Zinc plated.
      Part # 10125 $ 12.49  
72 1/2 - 79 PL620 V8/V6 Transmission adapter
V8 Transmission adapter 4 Speed, TH 350/C. Use #122268 cushions. 2 WD & After market 4 WD May fit latter trucks.
V6 Transmission adapter for 700R4 Use #122268 cushions. 2 WD & After market 4 WD May fit latter trucks. 1.5 LBS
      Part # 10130 $ 42.33  
72 1/2 - 79 PL620 V8 Transmission adapter 700R4 / pre 96 4l60/5/E
V8 Transmission adapter for 700R4, 4L60/E (6bolt), Use #122368 cushions. 2 WD & After market 4 WD. Semi Black powder coat finish. May fit latter trucks. 1.5LBS
      Part # 10132 $ 43.33  
72 1/2 - 79 PL620 U brackets
V6 Transmission cross member U brackets. 4 Speed, TH 350/C. Use #122378 cushions. 2 WD & After market 4 WD. With .400 (10mm) hole. Can also be used to move stock cross member back for 5 speed conversion. 1.75 high, 1.375 wide, 1.45 deep. Welding required. Zinc plated. Shipping $ 7.90 Lower 48 States
    Pair Part # 10135 $ 11.54  
72 1/2 - 79 PL620 May fit latter trucks
Transmission cushion bolt kit. TH 350 / 4 Speed. Contains correct domestic bolts, washers to install trans cushion to trans and adapter. Zinc plated.
      Part # 10140 $ 4.51  
72 1/2 - 79 PL620 May fit latter trucks
Transmission cushion bolt kit, w/ 700R4. Contains correct domestic / metric bolts, washers to install trans cushion to trans and adapter. Zinc plated.
      Part # 10145 $ 4.66  
72 1/2 - 79 PL620 SB V8 Headers
V8 Headers, SAP, 1 5/8" tubes w/ 3" collectors 2 WD 3/8" flanges, 3/8" collector flanges. Installed with engine bolted in place. Fender wells must be trimmed for installation. Bolts, gaskets, reducer package and instructions included. May fit latter trucks. 38 LBS
Black Part # 10150 $ 487.75
Bright Silver Ceramic coating Part # 10150C $ 709.77
    V Band collector clamps ADD $ 71.80  
72 1/2 - 79 PL620 SB V8 4 WD Headers
NO PICTURE V8 Headers 4 WD 1 5/8" tubes w/ 3" collectors, fender well exit. Fender wells must be trimmed for installation. Aftermarket 4 WD conversion only. May fit latter trucks.
Part # 10160 $ -
    Bright Silver Ceramic coating Part # 10160C $ -  
 
72 1/2 - 79 PL620 SB 4.3L V6, 2 & 4 WD Headers
V6 Headers, SAP, 1 5/8" tubes w/ 2 1/2" collectors with 5/16" flanges. Fender well exit, must be trimmed for installation. 2 WD and aftermarket 4 WD conversions. Bolts, gaskets, reducer package and instructions included. May fit latter trucks.
6.84 1/8th Part # 10165 $ 322.14
    Ceramic coating Part # 10165-C $ 504.75 30 lbs
           
LUV Izuzu Trucks   283-400CI Chevy / 4.3L Chevy V6 / LSx All Prices subject to change.
72 - 75 SB V8 Engine adapters
V8 Engine adapters pair R/L Bolt in, easy installation, no welding. Use #122142 or #122267 cushions & #10225 bolt kit. 2 WD & After market 4 WD. Instructions included. Gold zinc plated. Shipping $ 13.65 Lower 48 States
      Part # 10200 $ 89.60 2.5LBS
72 - 75 SB V8 Engine conversion package. TH 350/4 speed transmission
Everything needed to correctly mount your engine / transmission. Includes #10200 V8 Engine adapters pair R/L, pair #122267 D.O.T style cushions, #10225 bolt kit. With Transmission adapter, #10230 for TH350 / 4 Speed, #122268 cushion and #10240 bolt kit. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10200K1 $ 205.81  
72 - 75 SB V8 Engine conversion package. 700R4 / pre 96 4l60/5/E
Everything needed to correctly mount your engine / transmission. Includes #10200 V8 Engine adapters pair R/L, pair #122267 cushions #10225 bolt kit. With Transmission adapter, #10235 for 700R4, #122268 cushion and #10245 bolt kit. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10200K2 $ 208.38  
72 - 75 SB V8 Engine conversion package. 700R4 / pre 96 4l60/5/E
Everything needed to correctly mount your engine / transmission. Includes #10200 V8 Engine adapters pair R/L, pair #122267 D.O.T style cushions #10225 bolt kit. With Transmission adapter, #10235 for 700R4, #122268 cushion and #10245 bolt kit. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10200K3 $ 205.23  
76 - 89 SB V8 Engine adapters
V8 Engine adapters pair R/L Bolt in, easy installation, no welding. Use #122142 or #122267 cushions & #10225 bolt kit. 2 WD & 4 WD. Instructions included. Semi Black powder coat finish. Shipping $ 13.65 Lower 48 States
      Part # 10205 $ 99.50 2.5LBS
76 - 80 SB V8 Engine conversion package. TH 350 / 4 speed transmission
Everything needed to correctly mount your engine / transmission. Includes #10205 V8 Engine adapters pair R/L, pair #122267 D.O.T style cushions, #10225 bolt kit. With Transmission adapter, #10230 for TH350 / 4 Speed, #122268 cushion and #10240 bolt kit Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10205K1 $ 214.76 12lbs 5oz
76 - 80 SB V8 Engine conversion package. 700R4 / pre 96 4l60/5/E
Everything needed to correctly mount your engine / transmission. Includes #10205 V8 Engine adapters pair R/L, pair #122267 D.O.T style cushions and #10225 bolt kit. With Transmission adapter, #10235 for 700R4, #122268 cushion and #10245 bolt kit. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10205K2 $ 218.28 12lbs 5oz
76 - 80 SB V8 Engine conversion package. 700R4 / pre 96 4l60/5/E
Everything needed to correctly mount your engine / transmission. Includes #10205 V8 Engine adapters pair R/L, pair #122267 D.O.T style cushions and #10225 bolt kit. With Transmission adapter, #10232 for 4L60E (6 bolt tail), #122268 cushion and #10245 bolt kit. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10205K3 $ 215.13 12lbs 5oz
76 - 89 4.3L V6 Engine adapters
V6 Engine adapters, pair R/L, Bolt in, easy installation, no welding. Use #122142 or #122267 cushions & #10225 bolt kit. 2 WD & 4 WD. Instructions included. Semi Black powder coat finish. Shipping $ 7.90 Lower 48 States
      Part # 10210 $ 82.93 2.0 LBS
76 - 80 SB V6 Engine conversion package. TH 350 / 4 speed transmission
Everything needed to correctly mount your engine / transmission. Includes #10210 V6 Engine adapters R/L, pair #122267 D.O.T style cushions #10225 bolt kit. With Transmission adapter, #10230 for TH350 / 4 Speed, #122268 cushion and #10240 bolt kit Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10210K1 $ 199.45  
76 - 80 SB V6 Engine conversion package. 700R4 / pre 96 4l60/5/E
Everything needed to correctly mount your engine / transmission. Includes #10210 V6 Engine adapters pair R/L, pair #122267 D.O.T style cushions and #10225 bolt kit, Transmission adapter #10235 for 700R4, #122268 cushion and #10245 bolt kit Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10210K2 $ 202.66  
76 - 80 SB V6 Engine conversion package. 700R4 / pre 96 4l60/5/E
Everything needed to correctly mount your engine / transmission. Includes #10210 V6 Engine adapters pair R/L, pair #122267 D.O.T style cushions and #10225 bolt kit, Transmission adapter #10232 forL60E (6bolt tail), #122268 cushion and #10245 bolt kit Shipping included Lower 48 States
 
  Including USPS shipping, lower 48 States Part # 10210K3 $ 198.56  
76 - 80 LSx V8 Engine conversion. TH 350 / 4 speed transmission
Everything needed to correctly mount your LSx engine / transmission. LSx adapter 10715, engine adapter # 10210 for late 76 - 80 LUV trucks, pair #122267 D.O.T style cushions, 10225 bolt kit, Transmission adapter #10230 for TH350 / 4 speed, #122268 cushion and #10240 bolt kit. Instructions included. Use pn 19212593 oil pan. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10214K1 $ 289.78  
76 - 80 LSx V8 Engine conversion. 700R4 / pre 96 4l60/5/E
Everything needed to correctly mount your LSx engine / transmission. LSx adapter #10715, engine adapter # 10210 for late 76 - 80 LUV trucks, pair #122267 D.O.T style cushions, #10225 bolt kit, Transmission adapter #10235 for 700R4, #122268 cushion and #10245 bolt kit. Instructions included. Use pn 19212593 oil pan. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10214K2 $ 293.30  
76 - 80 LSx V8 Engine conversion. 4L60/5 6 bolt tail
Everything needed to correctly mount your LSx engine / transmission. LSx adapter #10715, engine adapter # 10210 for late 76 - 80 LUV trucks, pair #122267 D.O.T style cushions, #10225 bolt kit, With Transmission adapter, #10232 for 4L60E (6 bolt tail), #122268 cushion and #10245 bolt kit. Instructions included. Use pn 19212593 oil pan. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10214K3 $ 290.15  
72 - 75 4.3L V6 Engine adapters
V6 Engine adapters pair R/L Bolt in, easy installation, requires four holes to be drilled. No welding. Use #122142 or #122267 D.O.T style cushions & #10220 bolt kit. 2 WD & After market 4 WD. Instructions included. Gold zinc plated. Shipping $ 13.65 Lower 48 States
    Including USPS shipping, lower 48 States Part # 10215 $ 99.91  
72 - 75 SB V6 Engine conversion package. TH 350 / 4 speed transmission
Everything needed to correctly mount your engine / transmission. Includes #10215 V6 Engine adapters pair R/L, pair #122267 D.O.T style cushions #10220 bolt kit. With Transmission adapter, #10230 for TH350 / 4 Speed, #122268 cushion and #10240 bolt kit Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10215K1 $ 219.88  
72 - 75 SB V6 Engine conversion package. 700R4 / pre 96 4l60/5/E
Everything needed to correctly mount your engine / transmission. Includes #10215 V6 Engine adapters pair R/L, pair #122267 D.O.T style cushions and #10220 bolt kit. With Transmission adapter, #10235 for 700R4, #122268 cushion and #10245 bolt kit Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10215K2 $ 223.09  
72 - 75 LSx V8 Engine conversion. TH 350 / 4 speed transmission
Everything needed to correctly mount your LSx engine / transmission. LSx adapter #10715, engine adapter # 10215 for late 72 - 75 LUV trucks, pair #122267 D.O.T style cushions, #10220 bolt kit, Transmission adapter #10230 for TH350 / 4 speed, #122268 cushion and #10240 bolt kit. Instructions included. Use pn 19212593 oil pan. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10216K1 $ 311.16  
72 - 75 LSx V8 Engine conversion. 700R4 / pre 96 4l60/5/E
Everything needed to correctly mount your LSx engine / transmission. LSx adapter #10715, engine adapter # 10215 for late 72 - 75 LUV trucks, pair #122267 D.O.T style cushions, #10220 bolt kit, Transmission adapter #10235 for 700R4, #122268 cushion and #10245 bolt kit. Instructions included. Use pn 19212593 oil pan. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10216K2 $ 314.37  
72 - 75 LSx V8 Engine conversion. 4L60/5 6 bolt tail
Everything needed to correctly mount your LSx engine / transmission. LSx adapter #10715, engine adapter # 10215 for late 76 - 80 LUV trucks, pair #122267 D.O.T style cushions, #10220 bolt kit, Transmission adapter #10232 for 4L60/5 (6 bolt tail), #122268 cushion and #10245 bolt kit. Instructions included. Use pn 19212593 oil pan. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10216K3 $ 311.54  
72 - 75 Engine adapters bolt kit.
Contains correct bolts, washers & nuts to install cushions to engine, cushion to adapter & adapter to frame. Zinc plated. Use with adapter #10215. 1 LB
      Part # 10220 $ 16.92  
72 - 80 Engine adapters bolt kit.
Contains correct bolts, washers & nuts to install cushions to engine, cushion to adapter & adapter to frame. Zinc plated. Use For #10200, #10205, #10210. 1 LB
      Part # 10225 $ 12.52  
NOTE: V8 LUV transmission adapter applications
Turbo 350 /C, 4 speed, #10230
700R4, 4L60/E, (early) 1 piece case, 4 bolt tail shaft housing, T-5 5spd. #10235
4L60/5/E, Bolt on bell housing, 6 bolt tail shaft housing, #10232  
72 - 80 V8 / V6 Transmission adapter TH350 / PG / 4 SPEED
Bolts to stock location on frame. Use with #122268 cushion. 2 WD & After market 4 WD. Also for LSx conversions. Gold zinc plated, Black powder coat.. Shipping $ 13.65 Lower 48 States
      Part # 10230 $ 60.69 1.75 LBS
72 - 80 V8 / V6 Transmission adapter 4l60/5/E 2 Piece case.
Bolts to stock location on frame. Use with #122268 cushion. 2 WD & After market 4 WD. Will also work for LSx conversions. Semi gloss black powder coated. Shipping $ 13.65 Lower 48 States
      Part # 10232 $ 60.75 1.75 LBS
72 - 80 V8 / V6 Transmission adapter 700R4 / pre 96 4l60/5/E
Bolts to stock location on frame. Use with #122268 cushion. 2 WD & After market 4 WD. Will also work on LSx conversions. Gold zinc plated. Shipping $ 13.65 Lower 48 States
      Part # 10235 $ 63.90 1.75 LBS
72 - 80 Transmission cushion bolt kit. TH 350 / 4 Speed.
TH350, PG, 4 speed, with cushions #122268 or #122378. Contains correct domestic bolts, washers to install trans cushion to trans and adapter. Zinc plated. .25 LBS
      Part # 10240 $ 4.51  
72 - 80 Transmission cushion bolt kit, 700R4/ 4L60E transmission
Use for 700R4, 4L60(E). Use with cushions #122268 or #122378. Contains correct domestic / metric bolts, washers to install trans cushion to trans and adapter. Zinc plated. .25 LBS
      Part # 10245 $ 4.82  
72 - 80 V8 Headers 2 WD.
SAP, 1 5/8" tubes w/ 3" collectors 3/8" flanges. Full under chassis design. Installed with engine bolted in place. Includes bolts, gaskets and reducer kit # 6242. Street & strip. Easy starter, oil filter access. Use with #10200 / # 10205 engine adapters. May fit other installations. 34 LBS
Works with 168 & 153 tooth flywheels, starters.
Black Part # 10250 $ 504.30
With Ceramic coating Part # 10250C $ 714.32
    V Band collector clamps ADD $ 71.80  
72 - 80 LSxV8 Headers 2 WD.
SAP, 1 3/4" tubes w/ 3" collectors 3/8" flanges. Installed with engine bolted in place. Includes bolts, gaskets and reducer kit # 6242. Street & strip. Easy starter, oil filter access. Use with #10200 / # 10205 engine adapters. May fit other installations. 34 LBS
Works with 168 & 153 tooth flywheels, starters.
Black Part # 10250 $ -
With Ceramic coating Part # 10250C $ -
    V Band collector clamps ADD $ 71.80  
72 - 80 V8 Headers 4 WD
Fender well exit. SAP, 1 5/8" Mandrel bent tubes, 3/8" flanges, 3" collectors. Includes bolts, gaskets and reducer kit # 6242. Aftermarket 4WD conversions only. Shock tower interference on 2WD. Use with #10200 / #10205 engine adapters. May fit other installations. 32 LBS
    Black Part # 10260 $ 396.32  
72 - 80 4.3L Chevrolet V6 engines.
Near equal length, SAP, 1 5/8" diameter tubes, 5/16" flanges, 2 1/2" collectors with 5/16" welded collector rings. Under chassis exit. Includes bolts, gaskets and reducer kit # 6248. Clearance for oil filter and starter R & R. Use with #10210 / #10215 engine adapters. May fit other installations. 27 LBS
Black Part # 10265 $ 378.22
Ceramic coating Part # 10265C $ 555.74
           
Courier / Mazda P/U 221, 260, 289, 302, 351W Ford    
72 - 84 Engine adapters
1.5 LBS
2 WD & After market 4 WD. Use our #122257 or C6OZ-6038C, C8ZZ-6038A cushions & bolt kit #10325. Requires welding. Instructions included, Gold Zinc plated. Shipping $ 7.90 Lower 48 States
    Pair Part # 10300 $ 60.38  
72 - 84 Trans cross member
C4 / 4 Speed 2 WD & After market 4 WD except Rotary. Can be used with tab set #10780 for other transmissions. Use transmission cushion #122253. Semi black powder coated. Shipping $ 18.95 Lower 48 States
      Part # 10305 $ 73.03 3.0 LBS
72 - 84 Engine mounting kit
Everything needed to correctly, mount a SB Ford V8 into the 72 - 84 Courier, Mazda B 1800, B 2000 trucks. With 4 speed or C4 transmission. Engine adapters #10300, Engine cushions #122257, bolt kit 10325, Transmission cross member #10305, transmission cushion 122253 and bolt kit 10340. Welding is required. Shipping included Lower 48 States
Installation of pn 10380 recommended, additional cost.
    Including USPS shipping, lower 48 States Part # 10300K1 $ 195.36 15 lbs 14oz
Similar to #10300 72 - 80 Rotary Engine adapters front.
2 WD & After market 4 WD. Requires welding, Use #122257 cushions. Instructions included.
  Pair Part # 10310 $ 58.81 2 LBS
72 - 84 LSx Gen III / IV Chevrolet Engine adapters
4.8, 5.3, 5.7, 6.0, etc. Includes HD Polyurethane cushions #10742pr, 2 x bracket #10732 sets, #10714 and 2x #10712 bolt kits. Use re-drilled #10305 for TH350 / 4 speed or #10780 U brackets for 700R4 / 5 speed. Requires welding. Instructions included. Shipping $ 13.65 Lower 48 States
    Part # 10320 $ 125.13  
72 - 84 SB / LT1 Chevrolet Engine adapters
4.8, 5.3, 5.7, 6.0, etc. Includes HD Polyurethane cushions #10742, 2 x bracket #10732 set, #10714 and #10721 bolt kits. Use re-drilled #10305 for TH350 / 4 speed or #10780 U brackets for 700R4 / 5 speed. Requires welding. Instructions included. Shipping $ 13.65 Lower 48 States
    Part # 10322 $ 121.08  
72 - 84 Ford SB Engine adapters bolt kit
Contains correct bolts, washers & nuts to install cushions to engine, cushion to #10300 adapter. Zinc plated.
    Pair Part # 10325 $ 9.02  
Courier / Mazda Trans U bracket single bolt
U shaped bracket for welding to frame for trans cross member, hangers etc. 1.75" high, 1.375" wide, 1.45" deep with .500 hole (12.7 mm) centered. Also used for stock cross member with 5 Speed transmission conversion. Welding required. Zinc plated. Shipping $ 7.90 Lower 48 States
      Part # 10780 $ 12.04  
72 - 84 Transmission cushion bolt kit
Contains correct bolts, washers and nuts to install trans cushion to trans and cross member. Zinc plated.
      Part # 10340 $ 2.89  
72 - 84 Headers
221 - 302 CI. 2 WD & After market 4 WD. Except Rotary. 5/16" CNC laser cut flanges, SAP, 1 5/8" primaries 28" long. 3" collectors with 3/8" thick rings. Fender wells must be trimmed. No verification as to fitting 351W engine installations. Bolts, gaskets, reducer kit #6242 and instructions included. May fit other installations.
Black Part # 10350 $ 466.36
Ceramic coated Part # 10350C $ 703.88
    V Band collector clamps ADD $ 71.80 34 lbs
72 - 78 Coil springs
NO PICTURE Front HD front springs 2 WD
    Pair Part # 10365 $ 86.39  
72 - 84 Removable cross member conversion kit
Parts needed to modify tubular cross member for easy transmission removal, replacement. Includes 4 rings, bolts, lock washers and nuts. Instructions included. Shipping $ 7.90 Lower 48 States
      Part # 10380 $ 13.41  
Toyota   283-400CI Chevy / 4.3L Chevy V6 / LSx  
72 - 75 V8 Engine adapters
Bolt in, easy installation, no welding. Use #122142 or #122267 cushions& #10420 bolt kit. 2 WD & After market 4 WD. Instructions included Shipping $ 7.90 Lower 48 States
    Pair Part # 10400 $ 58.90  
72 - 75 LSx V8 Engine conversion
4.6, 5.3, 5.7, 6.0, etc. Use LSx adapter # 10710 and adapter # 10400 for 72 - 75 Toyota trucks. Use #122142 cushions. Instructions included.
           
76 - 77 V8 Engine adapters pair R/L
NO PICTURE Bolt in, easy installation, no welding. Use #122142 or #122267 cushions. 2 WD & 4 WD. Instructions included
      Part # 10405    
78 - 95 V8 Engine adapters pair R/L
NO PICTURE Bolt in, easy installation, no welding. Use #122142 or #122267 cushions. 2 WD & 4 WD. Instructions included
      Part # 10410    
72 - 80 Engine adapters bolt kit.
Contains correct bolts, washers & nuts to install cushions to engine, cushion to adapter & adapter to frame. Zinc plated.
      Part # 10420 $ 12.25  
72 - 75
Transmission cross member 2 WD
      Part # 10430    
76 - 80
Transmission cross member 2 WD
      Part # 10435    
72 - 80
Transmission adapter bolt kit. Contains correct bolts, washers to install trans cushion to trans and adapter.
      Part # 10445    
72 - 75
Dropped center link 2 WD
      Part # 10480    
72 - 75 V8 Headers
Fender well 1 5/8" tubes w/ 3" collectors 2 WD / After market 4 WD
      Part # 10450    
76 - 80 V8 Headers
Fender well 1 5/8" tubes w/ 3" collectors 2 WD / After market 4 WD
      Part # 10455    
Vega / Monza   283-400CI Chevy V8 / 4.3L Chevy V6 / LSx All Prices subject to change.
71 - 80 SBC V8 Engine adapters
Replace 2.3L 4 cyl Vega / Monza engine with a SB Chevy V8 engine. Simple bolt in installation, no welding. These are one piece stampings. These do not flex. For vehicles that have plates welded where the stock 4 cyl cushions bolt to the frame. To change from a 2.5L 4 cyl, 75 - 80, factory V8 / V6 engine you will need to add #10501 plate set. Use #10220 bolt kit (includes adapter to frame bolts), #122267 D.O.T style cushions. Instructions included. Finished in semi black powder coat. Shipping $ 13.65 Lower 48 States
Click for installed images   9 LBS Pair Part # 10500 $ 109.11  
71 - 75 4 cyl to SBC V8 Engine conversion package all transmissions
Everything needed to correctly install a SB Chevy into your 72-75 4 cyl Vega. Included are #10500 engine adapters, #10520 Bolt kit, 2 x #122267 D.O.T safety style engine cushions, #10530 transmission mounting package, must specify transmission. PG, TH350, 700R4, 4L60 (4 bolt tail), 4L60 (6 bolt tail), TH400, 200R4, 4/5 spd. #122268 transmission cushion and #10540 or #10545 transmission bolt kit. Finished in semi black powder coat Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10500K1 $ 286.66  
71 - 75 4 cyl to SBC V8 Engine conversion package
Everything needed to correctly install a SB Chevy into a 75 - 80 4 Cyl Vega, Monza. Includes #10500 engine adapters, #10520 Bolt kit, w/ bracket to frame bolts, 2 x #122267 D.O.T style engine cushions. Use the factory TH350 transmission cross member. To convert V6/V8 chassis, use #10502 plate set, or #10500K3 conversion kit. Finished in semi black powder coat Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10500K2 $ 158.33  
75 - 80 V6 / V8 to SBC V8 Engine conversion package
Everything needed to correctly install, a SB Chevy V8 into your 75 - 80 factory 2.5L 4cyl, factory V6, V8 Vega, Monza. Large factory plates must be removed. Included are #10500 engine adapters, # 10501 frame plates, #10520 Bolt kit, 2 x #122267 D.O.T. style engine cushions. For TH350, use the stock TH350 transmission cross member. For 700R4, 4l60e (4bolt), 5 spd, use 75/76 pn10535. 76/80 pn10532 Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10500K3 $ 200.78  
Monza / Vega engine plates 76 - 80.  
Use with pn 10500, 10505, 10510 conversion mounts, with original factory V6, V8, Monza vehicles. Allows use of our and other aftermarket mounts. These are similar to the original plates used on the 4 cyl vehicles. Plates bolt in, must be welded when positioned. Instructions included. Shipping $ 7.90 Lower 48 States
Photo similar to actual parts.   Set of 4 R/L Part # 10501 $ 42.45  
Monza / Vega engine plates 71 - 75.  
Close duplicates of factory 4 cyl plates. Use to replace missing factory 4 cylinder plates. Allows the use of our and other aftermarket mounts. These are similar to the original plates used on the 4 cyl vehicles. Plates bolt in, must be welded when positioned. Instructions included. Shipping $ 7.90 Lower 48 States
    Set of 4 R/L Part # 10502 $ 40.41  
Monza / Vega factory SBC V8 replacement mounts. Fully encapsulated
The STRONGEST, SAFEST, Legal replacement for the factory mounts. Exceeds Federal and Manufacturer specifications, retaining all provisions of the original factory DOT mounts. Fully encapsulated, Poly Urethane bushings, no sag, for complete engine control, better throttle response. These are a direct bolt in, placing your engine back to factory position. Other mounts that use rubber, out dated technology and materials, WILL sag and break allowing the engine to move, possibly causing an accident. Use stock bolts or pn10521 bolt kit. Satin Black powder coat finish. Installed pictures are shown on the actual V8 factory engine mount plates. Shipping $ 13.65 Lower 48 States 10503K1 169.57
Installed Pictures
Pair Part # 10503 $ 145.37
    Including bolt kit Pair Part # 10503K1 $ 155.97  
71 - 80 SBC V8 Poly Urethane Engine adapters
Available Late December Replace 2.3L 4 cyl Vega / Monza engine with a SB Chevy V8 engine. Simple bolt in installation, no welding. These are encapsulated poly urethane mounts. They meet all the latest federal safety standards. For vehicles that have plates welded where the stock 4 cyl cushions bolt to the frame. To change from a 2.5L 4 cyl, 75 - 80 or factory V6 engine you will need to add #10501 plate set. Use stock bolts or bolt kit #105xx. Instructions included. Finished in semi black powder coat. Shipping $ 13.65 Lower 48 States
    Pair Part # 10504    
71 - 80 4.3L V6 Engine adapters
Replace your 2.3L 4 cyl Vega or Monza engine with a newer 4.3L Chevy V6 engine. These vehicles have plates welded where the stock 4 cyl cushion bolts to the frame. Recommend bolt kit #10520 or #10525. 2.5L 4 cyl, factory V8 / V6 will need #10501 plates installed. Instructions included. Bolt in, no welding. Use #122267 safety cushions. Available in Semi Black or Red (shown) powder coat finish. Shipping $ 13.65 Lower 48 States
    Please specify color Pair Part # 10505 $ 89.22  
71 - 75 4.3L V6 Engine conversion package, all transmissions
Everything needed to correctly install a 4.3L V6 Chevy into your 71-75 Vega Monza 4 cyl. Included are #10505 engine adapters, #10520 Bolt kit, 2 x #122267 D.O.T safety style engine cushions, #10530 transmission mounting package, specify transmission. #122268 transmission cushion and #10540 or #10545 transmission bolt kit. Shipping included Lower 48 States
    Please specify color Pair Part # 10505K1 $ 266.77  
75 - 80 Monza 4.3L V6 Engine conversion package.
Everything needed to correctly install a 4.3L V6 Chevy engine, into your 75 - 80 Vega, Monza 4 cyl vehicle. These vehicles have plates welded where the stock 4 cyl cushion bolts to the frame. Instructions included. Bolt in, no welding. Factory V8 / V6 will use 10505K3.. Available in Semi Black or Red (shown) powder coat finish. Included are #10505 engine adapters, #10520 Bolt kit, 2 x #122267 D.O.T style safety engine cushions. Use stock TH350, 76 -80 10532 or 75 - 76 10535 transmission cross member for 700R4 , 4L60 (4 bolt tail) Shipping $ 13.65 Lower 48 States
    Please specify color Pair Part # 10505K2 $ 137.44  
75 - 80 Monza 4.3L V6 Engine conversion package. Factory mounting plates
Everything needed to correctly install a 4.3L V6 Chevy engine, into your 75 - 80 factory V6 / V8 Vega, Monza vehicle. Kit includes 10501 plates. Bolts to the frame. Instructions included. Bolt in, plates must be welded. Available in Semi Black or Red (shown) powder coat finish. Included are #10505 engine adapters, #10520 Bolt kit, 2 x #122267 D.O.T style safety engine cushions. Use stock TH350, 76 -80 10532 or 75 - 76 10535 transmission cross member for 700R4 , 4L60 (4 bolt tail) Shipping $ 13.65 Lower 48 States
    Please specify color Pair Part # 10505K3 $ 179.89  
75 - 80 LSx engine mounts for factory V8 frame brackets (large plates).
Replace your SBC engine with an LSx engine. HD Polyurethane mounts engine at original SB V8 position. Maintains correct engine center line and drive shaft U joint angles. Includes bolts. Bolt in, no welding. Slotted for slight fore and aft movement. Use a modified F body pan #10585 or mod kit #10583K1 and pickup tube #10575. Powder coated in Semi Black. Shipping included Lower 48 States
    Includes shipping lower 48 states. Part # 10508 $ 247.07  
71 - 80 LSx engine frame adapters with Poly Urethane bushings
Replace your 2.3L 4 cyl Vega or Monza engine with a LSx series engine. Mounts engine at original SB V8 position. Maintains correct engine center line and drive shaft U joint angles. 71 - 80 vehicles have plates welded where the stock 4 cyl cushions bolts to the frame. Recommend bolt kit #10523. 2.5L 4 cyl, factory V8/V6 mounting, will need #10501 plates installed. Instructions included. Bolt in, no welding. Use a modified F body pan #10583K1 or kit #10580 & pickup tube #10575. Powder coated in Semi Black. Shipping $ 13.65 Lower 48 States
    9 LBS Part # 10510 $ 216.25 8 Lbs
71 - 75 4 cyl vehicles, LSx HD Polyurethane engine conversion kit.
Replace your 2300, 4 cyl Vega or Monza engine with a LSx series engine. Mounts engine in factory SB V8 position. These HD Polyurethane mounts meet Federal safety specifications and maintain correct engine center line and drive shaft U joint angles. Includes mounts #10510, bolt kit #10523. Transmission kit #10530, 122268 cushion & bolt kit 10540/5. Instructions included. Bolt in, no welding. Use a modified F body pan #10583K1 or kit #10580, pickup tube #10575. With headers #10555 or 10557. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10510K1 $ 368.76 20 Lbs
71 - 75 4 cyl vehicles, LSx HD Polyurethane engine conversion kit.
Replace your 2300, 4 cyl Vega or Monza engine with a LSx series engine. Mounts engine in factory SB V8 position. Maintains correct engine center line and drive shaft U joint angles. These HD Polyurethane mounts meet Federal safety specifications and Includes mounts #10510, bolt kit #10523. Instructions included. Bolt in, no welding. Use a modified F body pan #10583K1 or kit #10580, pickup tube #10575. With headers #10555 or 10557. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10510K2 $ 237.30 9 Lbs
75 - 80 4 cyl vehicles, LSx HD Polyurethane engine conversion kit.
Replace your 2300, 4 cyl Vega or Monza engine with a LSx series engine. Mounts engine in factory SB V8 position. Maintains correct engine center line and drive shaft U joint angles. These HD Polyurethane mounts meet Federal safety specifications and Includes mounts #10510, plates 10501, bolt kit #10523. Instructions included. Bolt in, no welding. Use a modified F body pan #10583K1 or kit #10580, pickup tube #10575. With headers #10555 or 10557. Shipping included Lower 48 States
    Including USPS shipping, lower 48 States Part # 10510K3 $ 279.75 9 Lbs
71 - 80 Engine adapters bolt kit.
For #10500 / #10505. For SB Chevy. Contains correct bolts, washers & nuts to install cushions to engine, cushion to adapter. Includes bolts for adapter to frame.
      Part # 10520 $ 17.79 1.25 LBS
75 - 80 Factory V8 Engine mounts bolt kit.
Contains correct bolts and washers to install, the factory SB Chevy, or our #10503 cushions to the engine and frame brackets.
      Part # 10521 $ 10.60 1.25 LBS
75 - 80 Factory V8 Engine mounts bolt kit.
Contains correct domestic & metric bolts and washers to install #10510 LSx engine adapters into 71 -80 Vega Monza 4 Cyl chassis. Include Engine to adapter bolts, adapter to frame bolts
      Part # 10523 $ 12.89 1.25 LBS
75 - 80 LSx to Factory V8 Engine frame brackets bolt kit.
Contains correct domestic & metric bolts and washers to install #10510 LSx engine adapters into 71 -80 Vega Monza 4 Cyl chassis. Include Engine to adapter bolts, adapter to frame bolts
      Part # 10524 $ 11.29 1.25 LBS
71 - 80 Engine adapters bolt kit.
For #10500 / #10505. SB Chevy engines. Contains correct bolts, washers & nuts to install cushions to engine, cushion to adapter. Use stock bolts for adapter to frame.
      Part # 10525 $ 8.23 1 LBS
NOTE: Transmission adapter applications    
Power Glide, Turbo 350 /C, 4 speed
700R4, 4L60/E, (early) One piece case, 4 bolt tail shaft housing and 5 speeds.
4L60/5/E, Bolt on bell housing, 6 bolt tail shaft housing
TH400, 2004R, 4L80, some factory 6 speeds. May require tunnel sheet metal rework.
Vehicle Years
71 - 75 4 cyl Chassis, mounting points parallel to each other. Two long bolts
75 - 76, V6/V8, some 4 cyl. Right chassis boss back from left, 4 bolts 2 long.
76 - 80 4 Cyl, V6, V8 4 bolt mounting to rails attached to bottom of vehicle.  
71 - 75 Trans X member Improved design
700R4, 4L60 shown The strongest, correct height transmission mounting available for RWD V8 / V6 / LSx Conversions. Bolts to the original trans mount and reinforced section of floor pan. Available for V8, or V6, LSx with TH350, 700R4, 4L60/ E one or two piece case, 200R4 and TH400, 4 / 5 speeds (specify). After installation, cross member is removable for transmission R & R. Use #122268, 122672, 122288, 123125 has catch hook, cushion. Includes all mounting hardware and instructions. Designed for our front mounts, however will work with most other front mountings. Finished in semi black powder coat Shipping $ 18.95 Lower 48 States 13 LBS
Installed Pictures
Satin black powder coated. Part # 10530 $ 119.45
  Cross member brackets un welded, painted. Part # 10538 $ 111.31  
75 - 76 V6/V8, some 4 cyl. Trans X member, 700R4, 4L60, 5 speed transmissions
The strongest, correct height transmission mounting available for factory SBC, LSx conversions, with 700R4, 4L60 (4 bolt tail), 5 speeds (specify). Designed to handle the torque loads of the differential torque arm. Bolts to the original trans mounting points. Use stock, #122353 or 123125 with catch hook (add 1/8" spacer pn10718), cushion. Uses stock mounting hardware and includes instructions. Designed for our front mounts, however will work with factory and most other front mountings. Finished in semi black powder coat Shipping $ 18.95 Lower 48 States
Available now   Satin black powder coated. Part # 10535 $ 160.86 20x8x3
76 - 80 Trans cross member, 700R4, T-5, 4L60, ( 4 bolt tail) transmissions
Instructions listed in the technical section. Instructions for using the stock TH350, V8 / 4cyl transmission X member.
NOTE: Will not work with 4L60/E (6 Bolt tail) transmissions.
   
76 - 80 Trans cross member, 4L60E, (6 bolt tail) transmissions
In prototyping
           
72 - 80 Transmission cushion bolt kit.
TH350, PG, 4 speed, with cushions #122268 or #122378. TH400 with cushion #122268. Contains correct domestic bolts, washers to install trans cushion to trans and adapter. Zinc plated.
      Part # 10540 $ 4.51  
72 - 80 Transmission cushion bolt kit.
Use for TH350, PG, 4 speed with cushions #122288 or #122678 Contains correct domestic, bolts, washers and nut, to install trans cushion to trans and adapter. Zinc plated.
      Part # 10542 $ 3.47  
72 - 80 Transmission cushion bolt kit.
Use for 700R4, 4L60(E), 200R4 with cushion #122288 or #122672. Contains correct metric bolts, washers and nut, to install trans cushion to trans and adapter. Zinc plated.
      Part # 10544 $ 3.58  
72 - 80 Transmission cushion bolt kit.
Use for 700R4, 4L60(E), 200R4. Use with cushions #122268 or #122378. Contains correct domestic / metric bolts, washers to install trans cushion to trans and adapter. Zinc plated
      Part # 10545 $ 4.82  
71 - 80 SBC V8 Headers Use #10500, kits, #10500K1/2/3 engine adapters
1 5/8" tubes, SAP, 3/8" flanges, 3" collectors, w/3/8" flanges. Under chassis design. Will also fit factory V8 vega, Monza mounts, Or with our 10503 replacement factory mounts. Includes gaskets, bolts and reducer kit.
37 Lbs
Black Part # 10550 $ 502.98
Ceramic coated Part # 10550C $ 728.97
    V Band collector clamps ADD $ 71.80  
71 - 80 LSx V8 Headers Use 10508 / 10510 engine mounts
1 3/4 tubes, SAP, equal length, flow stabilized, w/ circular firing order, 3" collectors, 3 bolt rings. Headers are easily installed after engine is mounted. Right side has three down and one thru the fender well. Left side has all tubes going down. Includes gaskets and reducer kit. 38 Lbs
Part # 10555 $ 566.22
Ceramic coated Part # 10555C $ 781.24 Hinton 8004 135* boots
    V Band collector clamps ADD $ 71.80  
71 - 80 LSx stepped V8 Headers Use 10508 / 10510 engine mounts
1 5/8" to 1 3/4 tubes, equal length, flow stabilized, w/ circular firing order, 3" collectors, 3 bolt rings. Best for street. Headers are easily installed after engine is mounted. Right side has three down and one thru the fender well. Left side has all tubes going down. Includes gaskets and reducer kit. 37 Lbs
Part # 10557 $ 550.75
Ceramic coated Part # 10557C $ 768.67
    V Band collector clamps ADD $ 71.80  
71 - 80 SBC 4.3L V6 Headers
1 5/8" tubes, SAP, 5/16" flanges, 2 1/2" collectors, w/ 5/16" flanges. Flow stabilized, w/ circular firing order. Under chassis exit, For use with our 10505 engine mounts. Includes gaskets, bolts and reducer kit.
28 Lbs
Part # 10560 $ 388.45
    Ceramic coated Part # 10560C $ 557.55  
71 -75 Vega Coil springs
Front HD With shallow lower spring cups.
    Pair Part # 10565 $ -  
LSx Oil Pick up
Shipping $ 18.95 Lower 48 States
HP Oil pick up tube for modified "F" Body pan using #10580 pan kit. One piece tube, no welds to leak, with hold down strap and heavy duty flange. Can also be used for HP stock "F" body oil pans. Increased oil flow capacity. Will work with windage trays. Yellow zinc plated. Use blue GM O ring 12557752.
    Gold zinc plated 3.5 LBS Part # 10575 $ 112.56 15x8x6
LSx Oil pan modification kit to correctly install engine on factory crankshaft centerline
Kit consist of 3 plates CNC cut to modify F body pan pn 12628771, to correctly fit in Vega / Monza chassis. Additionally all known other pans will hang too low. After market pans do not have the side steps to allow the tie rod ends to go under at full lock. The pan kit also provides a wide channel to facilitate return oil from the front of the engine. Some full length windage trays will work. Requires #10575 oil pickup tube. Instructions included, requires aluminum welding. Shipping $ 18.95 Lower 48 States
    3 Piece kit Part # 10580 $ 44.10  
LSx Oil pan modification kit to correctly install engine on factory crankshaft centerline
Kit consist of 3 plates CNC cut to modify F body pan to correctly fit in Vega / Monza chassis. Additionally all known pans will hang too low. After market pans do not have the side steps to allow the tie rod ends to go under at full lock. The pan kit also provides a wide channel to facilitate return oil from the front of the engine. Some full length windage trays will work. Includes #10575 oil pickup tube. Instructions included, requires machining and aluminum welding. Shipping $ 18.95 Lower 48 States
    4 Piece kit Part # 10580K1 $ 156.66 15x8x6 3Lbs
LSx Monza / Vega modified oil pan "Needed to put engine on factory crankshaft centerline"
Modified F body oil pan, (GM #12628771) to correctly fit an LSx engine into Vega / Monza chassis. All known factory & aftermarket pans will not clear tie rod ends at lock and hang too low. The modified pan provides a wide channel to better facilitate return of oil, from the front of the engine. Powder coated. Some full length windage trays with modification, will work. Requires #10575 oil pickup tube. 19 LBS
Use Dip stick tube 12558253, Gauge 12551581
Modified pan Modified Aftermarket pan. Part # 10583K1 $ 499.41
Includes Oil pickup tube Part # 10583K2 $ 608.57
Also available
Stock After market F body Pan. Unmodified Part # 10585 $ 247.84 23x14x7
Engine Conversion Components      
Chevrolet SB V6/V8 engine shims
Install between block and cushion. Increase oil pan, cross member or header clearances and proper engine angle. Raises engine approx .125 These have the groove for the stock or solid mounts. Gold zinc plated Shipping $ 7.90 Lower 48 States
    Pair Part # 10702 $ 10.96  
Chevrolet SB V8 solid engine mounts
    Pair Part # 10703 $ -  
Chevrolet SB V8 solid engine mounts
Solid engine mounts that will replace #122142 or #122267 engine cushions. 2.625" wide x 1.75" tall. Made from .188 thick steel, Gold zinc plated or black powder coat. Use bolt kit #10722 Shipping $ 13.65 Lower 48 States
Click for Dimensions   Pair Part # 10704 $ 23.43  
Chevrolet LSx F body style solid engine mounts
Use pn 10740 Solid engine mounts that will replace #123064 or factory engine cushions. Made from .187 thick steel. Gold Zinc plated w/ gold or black powder coat. Use bolt kit #10722.
    Pair Part # 10705 $ -  
Chevrolet LSx to SB V8 mount adapters 4.8, 5.3, 5.7, 6.0, etc.  
Install a LSx V8 engine. Use original or after market, 3 bolt engine and frame brackets. 2 adapters in one. Bell housing flange is in stock position or engine can be moved 1/2" forward. Made from 3/8" steel for maximum strength, no flex. 4 flat head & 4 Flat head socket bolts with Instructions included. #10718 Transmission shim may be needed for drive line angle correction. Gold zinc plated Shipping $ 7.40 Lower 48 States
    Pair Part # 10710 $ 81.35  
LSx Hex head adapter and engine cushion bolts    
Correct metric size, thread and length bolts for attaching LSx adapters or cushions to LSx block. Use Part #10716 where flat head bolts are needed.
    Set of four Part # 10712 $ 3.64  
Chevrolet LSx engine mount shims.
These go between block and cushion. Helps with oil pan, cross member or header clearance and proper engine angle. Raises engine approx .120 inches. Designed to clear tab on stock mount. Zinc plated. Shipping $ 7.90 Lower 48 States
    Pair Part # 10713 $ 11.07  
LS1 engine thru mount bolts.    
Correct metric size, thread and length bolts for attaching LS1 stock engine cushions, #123064 or our #10735 urethane cushions to frame brackets. Also use with our #10740 universal engine adapters.
      Part # 10714 $ 9.78  
Chevrolet LSx to 4.3L V6 mount adapters 4.8, 5.3, 5.7, 6.0, etc.  
Use original 4.3L V6 or after market frame brackets with factory 3 bolt engine cushions. Bell housing flange is in stock position or engine can be moved 1/2" forward. #10718 Transmission shim may be needed for drive line angle correction.
Chevrolet LSx to SB V8 engine adapter 4.8, 5.3, 5.7, 6.0, etc.
Use original 4.3L V6 or after market frame brackets with factory 3 bolt engine cushions. Bell housing flange is 2" or 2 1/2" forward of stock position. #10718 Transmission shim may be needed for drive line angle correction. Shipping $ 7.40 Lower 48 States
Block bolts, Instructions included. Gold zinc plated
    Pair Part # 10715 $ 90.59 1.5 lbs
LSx tapered adapter bolts    
Correct metric size, taper, thread and length bolts for attaching LSx adapters to LSx block. May work with other adapters. Use Part #10712 where hex head bolts are needed.
    Set of four Part # 10716 $ 2.94  
Chevrolet V8 / V6 4.3L Transmission to Engine bolt set.  
Correct metric size, thread and length bolts for attaching the transmission to the engine. No washers should be used. Bright Zinc plated.
      Part # 10717 $ 4.16  
GM Transmission shim .125"
Shim for raising transmission mount .125"thick. Helps achieve proper engine and driveline angle. Gold zinc plated.
  Each Part # 10718 $ 4.16  
Chevrolet SB V8 / V6 engine cushion bolt kit    
Contains correct bolts & washers to install stock or Poly cushions to engine. Zinc plated.
      Part # 10721 $ 3.23  
Chevrolet SB V8 / V6 engine cushion bolt kit    
Contains correct bolts, washers & nuts to install cushions to engine, cushion to adapter / frame. Zinc plated.
      Part # 10722 $ 8.23  
Chevrolet SB V8 / V6 Poly engine bolt kit    
Contains correct bolts, washers & nuts to install cushions to frame bracket. Zinc plated.
      Part # 10723 $ 7.12  
Chevrolet V8 Domestic Transmission to Engine bolt set.  
Correct size, thread and length bolts for attaching the transmission to the engine. No washers should be used. Bright Zinc plated.
      Part # 10724 $ 3.02  
Click for additional colors
Chevrolet LSx engine frame adapter    
70-92 F-Body, Camaro / Firebird, 78-87 G Body, Malibu, Monte Carlo.
One piece, slotted mounting holes, for installing LSx engines on stock or aftermarket front frames. With stock LS1 cushions, #123064, aftermarket or our #10740 HD Polyurethane replacement engine cushions. Available in Silver ,Satin black (shown) or Red powder coat finish. Recommend #10722 thru bolt kit. Shipping $ 13.65 Lower 48 States
  Please specify color Pair Part # 10726 $ 75.87  
1997 - 2002 Camaro / Firebird LSx    
New installations or replacing heavy stock brackets. For installing 4.8, 5.3, 5.7, 6.0, 6.2 LSx engines. Using stock 5.7 LS1 engine cushions, # 123064, after market engine cushions or with our #10740 Urethane replacement engine cushions. Use #10722 thru bolt kit. These are significantly lighter than stock.
    Pair Part # 10728 $ -  
Universal frame tabs    
Shipping $ 7.40 Lower 48 States
Tabs to install poly engine cushion to frame. .1875 material, .5" bolt hole, 3.5" center of bolt to tab end. 3" tab end width.
    Pair Part # 10732 $ 12.15  
Universal frame tabs    
Tabs to install poly engine cushion to frame. .1875 material, .5" bolt hole, 5.5" center of bolt to tab end. 3" tab end width.
    Pair Part # 10733 $ -  
Chevrolet LS1 Universal engine mount U bracket.  
Custom mounts using the stock cushion #123064 or our #10740 Urethane replacement engine cushions. .250" thick, right and left. Bare.
    Pair Part # 10734 $ 21.46  
Chevrolet LSx engine Universal U bracket    
Custom mounts using #10738 or #10742 Urethane engine cushions. 3.5" wide, .250" thick. Bare.
    Pair Part # 10736 $ 20.83  
225, 231, 252, 3.2L, 3.8L Buick V6 Poly Engine mounts  
Coming soon
For custom mounting of the Buick V6 engine. Use plates Part # 10732 or custom plates, to frame. Satin black powder coat finish. Instructions included. Shipping $ 13.65 Lower 48 States
    Pair Part # 10600 $ -  
Chevrolet SB/BB HD Polyurethane engine cushion  
SB Gen I / II engines. These HD Polyurethane mounts meet Federal safety specifications and can be used with our #10732, #10733 tabs or #10737 frame adapters for custom engine installations. Recommend #10721 bolt kit Satin black powder coat finish. Shipping $ 13.65 Lower 48 States
    Pair Part # 10738 $ 73.96  
Chevrolet LSx, HD Polyurethane engine cushion  
Direct replacement for stock LS1 5.7L factory engine cushions. These HD Polyurethane mounts meet Federal safety specifications and will fit 4.8, 5.3, 5.7, 6.0 LSx V8. Can also be used with #10732, #10733, #10734 brackets for a custom engine installation. Use stock or 2 x #10712 & 1 x #10714 bolt kits. Available in Silver or Satin black powder coat finish. Shipping $ 13.65 Lower 48 States
    Pair Part # 10740 $ 83.85  
Chevrolet LSx, SB, Gen II, HD Polyurethane engine cushion  
Dual bolt pattern. Will fit all LSx V8 and SB Gen I / II, 4.3L V6 engines. 3.5" wide use with our #10732 and #10736 3.5" wide, brackets for custom engine installations. Use 2 x #10712 & #10723 for LSx. SB use #10721 & #10723 bolt kits. Satin black powder coat finish. Shipping $ 13.65 Lower 48 States
    Pair Part # 10742 $ 72.98  
Chevrolet HD Polyurethane frame cushion    
Replaces the stock frame cushions, our number #122346. Use the stock engine bracket. These HD Polyurethane mounts meet Federal safety specifications and provide the ultimate in strength, stability and control of your engine in all types of use. Perfect for V8 conversions, off road etc. Satin black powder coat finish. Shipping $ 13.65 Lower 48 States
    Pair Part # 10744 $ 76.28  
Chevrolet Urethane frame cushion    
Replace the stock frame cushion #122292 with our HD Polyurethane version. Uses the stock engine bracket. These HD Polyurethane mounts meet Federal safety specifications and provides exceptional strength, stability and control of your engine in all types of use. Perfect for V8 conversions. Satin black powder coat finish. Shipping $ 13.65 Lower 48 States
    Pair Part # 10746 $ 80.61  
Ford 2.3L SOHC poly engine adapters    
Currently in prototype Poly engine mounts for the 2.3L Lima engine. Paired R & L. These will give you complete engine stability for High performance, N/A or Turbo, Mustang II, Pinto's. Also can be used for custom mountings. Satin black powder coat finish.
    Pair Part # 10755 $ -  
Ford 2.3L SOHC Polyurethane transmission mount
Replace your loose stock Pinto / Mustang II transmission mount, for better transmission stability and shifting. Stock and High performance, N/A or Turbo. Also can be used for custom mountings. Adjustable for stock or 1/2" left and back. Powder coated satin black or silver. Shipping $ 13.65 Lower 48 States
Please specify color Part # 10756 $ 59.98
    Positions Transmission 1/2" lower Part # 10756s $ 59.98  
Ford SB V8 engine adapters shims    
.125 thick shims to raise engine. Helps with oil pan, cross member or header clearance and proper engine angle. Gold Zinc plated. Shipping $ 7.90 Lower 48 States
    Pair Part # 10765 $ 9.37  
Ford Transmission shim    
Shim for raising transmission mount .125". Helps achieve proper engine and driveline angle. Gold Zinc plated.
    Each Part # 10767 $ 4.95  
Ford SB engine cushion bolt kit    
Contains correct bolts, washers & nuts to install cushions to engine, cushion to adapter. Zinc plated.
      Part #10325 $ 9.02  
Universal U bracket single bolt. .4 bolt hole    
U shaped bracket for welding to frame for transmission cross member or neatly hanging other items etc. 1.75" high, 1.375" wide, 1.45" deep, with .400 hole (10mm) centered. Requires welding. Zinc plated.
    Pair Part # 10780 $ 12.04  
Universal U bracket single bolt. .5 bolt hole    
U shaped bracket for welding to frame for transmission cross member or neatly hanging other items etc. 1.75" high, 1.375" wide, 1.45" deep, with .500 hole (12.7mm) centered. Requires welding. Zinc plated.
    Pair Part # 10785 $ 12.04  
       
U shaped bracket for welding to frame for transmission cross member or other items etc. 1.75" high, 2.5" wide, 1.5" deep with 2 x .400 holes (10mm). Requires welding. Zinc plated.
    Pair Part # 10790 $ -  
Transmission cushion bolt kit. GM TH 350 / 4 Speed  
Contains correct domestic bolts, washers to install trans cushion to trans and adapter. Zinc plated.
      Part # 10540 $ 4.51  
Transmission cushion bolt kit. GM 700R4    
Contains correct domestic / metric bolts, washers to install trans cushion to trans and adapter. Zinc plated.
      Part # 10545 $ 4.66  
72 - 80 Ford Transmission cushion bolt kit    
Contains correct bolts, washers and nuts to install trans cushion to trans and cross member. Zinc plated.
      Part # 10340 $ 2.89  
           
If you do not see what you need, e-mail tech@powerbyace.com We may have it or can produce it.
Automotive Component Engineering 2006/2018
www.powerbyace.com
12/4/2018
Return to Parts Index